Set up HP Wireless Direct Printing
NOTE:
This feature is available with wireless models only.
The HP Wireless Direct Printing feature lets you print from your wireless mobile device directly to an
HP Wireless Direct-enabled product without requiring connection to an established network or the Internet.
Use HP Wireless Direct to print wirelessly from the following devices:
●
iPhone, iPad, or iTouch using Apple AirPrint
●
Mobile devices that run Android, iOS, or Symbian using the HP ePrint Home & Biz application
To set up HP Wireless Direct from the control panel, complete the following steps:
NOTE:
This feature requires you to set up a security password for the product. If you have not previously
configured a password, you are prompted to configure one after you enable the feature.
1.
From the Home screen on the product control panel, touch the Wireless button.
2.
Open the following menus:
●
Wireless Menu
●
Wireless Direct Settings
●
On/Off
NOTE:
If the
Wireless Direct Settings
item does not appear on the control panel, you need to upgrade
the product firmware. To get the current version, go to
www.hp.com
, enter the HP product number in
the search box, select the specific product model, and then click the Software & Driver Downloads link.
3.
Touch the
On
menu item. The product might prompt you to set a security password. The product saves
the setting and then returns the control panel to the
Wireless Direct Settings
menu.
ENWW
Set up HP Wireless Direct Printing 145